AEM Cold Air Intake System

Please select your vehicle below for custom pricing

View larger image
Additional Views
List Price:
AutoAnything:
Shipping: Free Shipping
Availability:
Customer Rating: Customer Rating
Loading... Select your vehicle
Product Info

Features

  • With an AEM Cold Air Intake System, your engine’s lungs are always filled with the coolest air for rubber-burning performance
  • Fully custom-engineered for your specific year, make, model and engine
  • The Dryflow filter sucks in low-temp air from the wheel well
  • For the smoothest airflow, each aluminum intake tube is CNC mandrel-bent
  • Available in your choice of flashy finishes, depending on your vehicle
  • Made in the USA
  • Average install times run around 90 minutes using the included soft-mount hardware kit and comprehensive instructions

Description

Put your fire-breathing engine on a strict diet of icy oxygen with an AEM Cold Air Intake System. With the new rush of colder air flowing into its belly, your motor will deliver greater horsepower and torque.

Every aspect of the AEM Cold Air Intake System is designed for pink-slip-winning speed. It’s custom-shaped by advanced mandrel benders to reach down to the oxygen sweet spot outside your engine compartment. And, the AEM Dryflow filter delivers a steady blast of cleaner air for more explosive combustion.

More than just muscle, your AEM Cold Air Intake System has the look to back up its performance. The choice aluminum tubing comes in your choice of distinct colors, depending on your vehicle. From Rocker Red to Brilliant Polished, there’s a shade to match your tastes.

Thanks to detailed instructions and AEM’s soft-mount hardware kit, installing the AEM Cold Air Intake is a breeze. Plus, you get a Lifetime Warranty.

Notes

  • Emissions-related parts for new model year vehicles may be in "pending" status for C.A.R.B. exemption. Earning exemption status takes time, but will be complete before your vehicle's first smog check.

Average Customer Rating

  (248)
Appearance Appearance
Ease of Installation Ease of Installation
Price/Value Price/Value
Quality Quality
Sort By
CAI w/ Heat Shield

Posted on 11/16/2008 by Daniel P. - 2008 Nissan Altima (Jersey City,NJ)

Appearance
Ease of Installation
Price/Value
Quality

"Easy install, amazing sound (particularly above 3500 rpm), price a little steep but you get the quality. Spec's call for a 3-4% increase in whp on my 270 hp coupe, could not feel the difference but saw it as my rpm races to redline much faster than stock. Definitely pleased with the purchase and plan on reaping the full benefits when I pick up racing lines y-pipes and set up the borla cat back system."

Was this review helpful? Yes No

About Daniel P.
Vehicle
2008 Nissan Altima
I use my vehicle for
Fun
 
AEM CAI

Posted on 10/21/2008 by Kyle F. - 1999 Honda Accord (Charlottesville,VA)

2 of 2 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"I really dont have much to compare this to, but what i do know is it does exactly what i wanted. It gives the engine just a little noticeable kick and at the same time sounds amazing. I installed it myself and only took a couple hours. (the uninstalling of the stock intake took about an hour and 20 minutes, so real installation was like 20). All in all im extremely happy with my intake."

Was this review helpful? Yes No

About Kyle F.
Vehicle
1999 Honda Accord
I use my vehicle for
commuting, fun
 
AEM CAI for aveo = WOW huge improvement, awesome sound

Posted on 09/30/2008 by Erik K. (Timonium,MD)

Appearance
Ease of Installation
Price/Value
Quality

"This is a video of us installing/driving my hatchback aveo 2006 ls after installation. It should speak for itself. Turn your speakers up to hear the sound! http://www.youtube.com/watch?v=2_GT84hzEp8"

Was this review helpful? Yes No

About Erik K.
 
Good to save some gas.

Posted on 09/23/2008 by Mitch H. - 2007 Mazda 3 (Norman,OK)

Appearance
Ease of Installation
Price/Value
Quality

"I bought a new Mazda 3 and put this on it along with straight exhausts. Combined, I spent ~ $340. With just the cold air intake, power gains and better mileage are most notable on the highway. After about a month, I'm getting about a 7-8mpg gain on the highway. These modifications pay for themselves within a year. I had to take my car to a mechanic to install the cold air intake (I didn't have blocks to put it on), and installing both took about an hour of labor (+$65)."

Was this review helpful? Yes No

About Mitch H.
Vehicle
2007 Mazda 3
 
dewey--kutztown, pa 05 mazda 3s

Posted on 09/16/2008 by Dwayne M. (Kutztown,PA)

3 of 3 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"What a great product!! I am suprised that I don't have more intake noise, which is a good thing, but sounds awesome if I run it over 3500 rpms! Slight increase in power. Definitely more response when I romp on it! Installation wasn't bad and the instructions were easy to follow. Shipping was a little slow but I wasn't in a rush so it didn't matter. I'd recommend it for anyone!!!!"

Was this review helpful? Yes No

About Dwayne M.
 
AEM cold air intake install on a 2008 Scion Xb

Posted on 09/14/2008 by Cindy S. - 2008 Scion xB (Getzville,NY)

6 of 6 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"Part took about two weeks to arrive.Install took about 90 minutes.Directions were precise and had step by step pictues.Fit was perfect,except AEM logo is barely visible with pipe installed properly. Only difficult part of job was that filter has to be slipped through wheelwell then installed from above.Immediately after install there was a noticable improvement in torque.Also engine sound is much more "throaty" especially above 3500 rpms. Since I disconnected battery to do job, my mileage computer reset. My avg. mpg is up to 25 and climbing. I averaged 27mpg prior to the install. I'm hoping to get 29 mpg average with the new intake but the car sounds so good it's hard to keep my foot off the pedal.Overall it was an easy,inexpensive mod with a large impact on performance."

Was this review helpful? Yes No

About Cindy S.
Vehicle
2008 Scion xB
I use my vehicle for
Everthing
 
Nissan Versa: Reliving the excitement of a new car

Posted on 09/11/2008 by Sam S. - 2007 Nissan Versa (Gilbert,AZ)

4 of 4 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"The AEM Cold air intake does much more than just help draw colder air into the engine... Removing the silencers from my particular car (07' Nissan Versa) has had a ridiculous sound effect with the variable valve timing on the engine. It sounds incredible. I've done intakes on an F150 pickup truck, Honda Civic and Nissan Sentra... The gain in sound quality from this particular part was unbelievable. Installing was rather annoying with the plastic fender clips and tight squeeze trying not to scratch the aluminum polish, but the end result of the AEM cold air intake leaves me with this economy car that sounds bad-ass. "And it only has an intake on it." Be warned: you will be very tempted to leave your throttle open for extended periods of time."

Was this review helpful? Yes No

About Sam S.
Vehicle
2007 Nissan Versa
I use my vehicle for
Commuting to school, work, and daily activites (gym, food, etc.)
 
Great Product

Posted on 08/18/2008 by Edward P. - 2007 Nissan Altima (Fort Polk,LA)

2 of 3 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"This intake is great, gained a small increase in power. Was really easy to install in a 07 nissan altima 3.5 se. The gun metal color(which is marked as silver)is great. Overall really satisfied."

Was this review helpful? Yes No

About Edward P.
Vehicle
2007 Nissan Altima
 
WOW!

Posted on 08/14/2008 by Aris M. - 2006 Pontiac Solstice (Chula Vista,CA)

2 of 2 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"THIS AEM PRODUCT IS THE BEST THING THAT HAPPENED TO MY 2006 PONTIAC SOLSTICE, GREAT SOUND! INCREASED PERFORMANCE! AND LOOKS GREAT WITH THE ENGINE. INSTALLATION TOOK ME JUST LESS THEN AN HOUR, I RECCOMEND THIS COLD AIR INTAKE NOT JUST FOR MY CAR, BUT FOR ANY CAR OUT THERE! THANKS FOR THE EXCELLENT SERVICE AND QUICK RESPONSE DELIVERY TO AUTO ANYTHING."

Was this review helpful? Yes No

About Aris M.
Vehicle
2006 Pontiac Solstice
 
07 civic si

Posted on 07/29/2008 by Julio S. - 2007 Honda Civic (Denton,TX)

7 of 10 people found the following review helpful.

Appearance
Ease of Installation
Price/Value
Quality

"Umm not as easy as i thought to install but sounds great not 2 much of a power gain, but a good first mod."

Was this review helpful? Yes No

About Julio S.
Vehicle
2007 Honda Civic
I use my vehicle for
stunnin